Respironics bilichek Скачать руководство пользователя | Manualshive

Страница: 14 / 25

background image

ENGLISH

12

THE BATTERY STATUS INDICATOR (BSI)

BSI Color

Battery Charger Mode

Solution

Off

Battery pack not sensed in well or

Place battery pack in well and/or check all power

charger base not connected to

connections.

power supply.

Green

Battery pack fully charged.

Battery pack ready for use.

Amber

Battery pack in well is charging,

Continue charging until green light appears.

but not ready.

Amber flashing

Battery pack in well B is deep

Continue charging until green light appears.

discharging.

Red flashing

Bad battery pack or charger base.

Replace battery pack in charger base. If problem
persists with new battery pack, charger base has
malfunctioned. Call for service.

NOTE: When Deep Discharging the battery pack, the BSI will blink amber then become a constant

amber color when charging.

NOTE: If the BSI is flashing red when battery pack is in place, try resetting the battery pack in the

charging well. If problem persists, set a new battery pack in charger base. If problem
continues with a new battery pack, the charger base has malfunctioned.

10.0 INITIAL SET-UP

•

Visually inspect that all components are without physical damage. If damage is noted, please contact your local
dealer/distributor or Respironics.

•

Plug the power cord into the power supply and then into a grounded outlet.

•

Connect the power supply to the charger base by inserting the plug into the socket on the rear of the charger base. The
Battery Status Indicator (BSI) lights will flash red, green, amber, and then off (approximately 1 second each) to
indicate proper operation.

Charger Base

«
...
12
13
14
15
16
...
»

Содержание bilichek


























Отзывы:

Нет отзывов

Похожие инструкции для bilichek

LevelMaster 7100

Бренд: ABB Страницы: 2

Бренд: ABB Страницы: 4

Бренд: WAGER Страницы: 36

Бренд: Datavideo Страницы: 26

Бренд: Datcon Страницы: 84

Бренд: Ebtron Страницы: 5

Бренд: Okolab Страницы: 4

Бренд: Rayjet Страницы: 81

Бренд: LaMotte Страницы: 2

Бренд: Lampa Страницы: 12

Бренд: Underground Magnetics Страницы: 48

Бренд: SIGLENT Страницы: 32

DigiFlow 6710M-22

Бренд: Savant Страницы: 3

Бренд: FM Marin Страницы: 8

Thermo Scientific iCE 3000 Series

Бренд: ThermoFisher Scientific Страницы: 42

Бренд: Kane Страницы: 52

MarMonix MSL-765

Бренд: Farnell Страницы: 15

Бренд: Shimadzu Страницы: 22

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды