NEVER
change any component parts associated with the suit in a contaminated
area.
Materials used in the construction of the system are not known to cause allergic
reactions to the majority of individuals. The system contains no components made
from natural rubber latex.
This equipment is not to be used in oxygen-deficient environments, e.g. confined
spaces. For further information refer to the instructions for the 3M Jupiter™ AFU.
For any enquiries please contact the Respirex customer services department on
Tel : +44(0) 1737 778600 or Fax : +44(0) 1737 779441.
® DuPont’s registered trademark.
Storage
To prevent damage occurring during storage the system is supplied in a plastic
container. Suits should always be stored in a clean and dry condition at ambient
temperature. If being stored for long periods of time the suits should be kept out of
direct sunlight.
Based
upon
real
time
use,
the
PRPS
system
has
a
minimum
shelf
life
of
five
years.
Additional
research
on
Tychem®TK.
material
would
sugge
st
a
possible
shelf
life
of
up
to
ten
years.
For
the
purposes
of
disposal
a
sealable
hazbag
is
included
with
the
system.
For
further
information
on
disposal
refer
to
page
18.
4
In order to maintain the level of protection offered, care should be taken to
minimize the risk of damage occurring to the PRPS suits during transportation
between work areas. It is recommended that all PRPS suits are transported in a
suitably sized rigid container resistant to penetration by sharp objects, abrasive
surfaces, chemicals, oils, solvents etc.
