E-17
OPERATION
Remote Control Operation
RESET1
and
RESET2
buttons
After replacement of activated
carbon filter, make sure to press
RESET1
button 5 times to reset
the filter timer. Also, after
replacing the UV lamp, press the
RESET2
button 5 times to reset
the UV lamp timer.
Press the
RESET1
button 5 times to
reset the timer for activated carbon
filter: 1, 2, 3, 4, 5-beep~
Press the
RESET2
button 5
times to reset the timer for UV
lamp: 1, 2, 3, 4, 5-beep~
Before pressing the
RESET
buttons, be sure the unit is
plugged in.
The unit will start operating when the
POWER button is pressed. Pressing
the button again will stop operation.
AUTO Button
At AUTO mode, the fan speed
is automatically switched (H, M,
L) depending on the amount of
pollution in the air.
Transmitter
UV LAMP Button
When pressed, turn off
the UV lamp.
SPEED Button
The fan speed can be
switched among Low,
Medium and High settings.
TIMER Button
The set time switches every
time the button is pressed as
shown below.
POWER (ON/OFF) Button
1hr-2hr-3hr
Cancel
**The indicator light shows
the set time.
NEG.ION Button
When pressed, the generation
of ions will cease and the
negative ion generator light on
the control panel will go out.
NIGHT Button
When pressed, all the indicator
lights will go out except the
green ON light on the control
panel.
