E-7
FEATURES AND SPECIFICATIONS
Multi-Stage Filters
The unit utilizes a two-stage electrostatic precipitator combined with a Pre-filter (for large particles), an
Activated carbon filter (for odors and gases), UV germicidal light (killing airborne pathogen), a Photo
catalytic filter (removes VOC's) and a Negative ion generator.
Automatic Function
The gas sensor can let the unit automatically select the appropriate fan speed depending on the air quality
detected.
Filter and UV Lamp Replacement Indicator Lights
The "FILTER LIFE" and "UV LAMP" replacement indicators tell you when to replace the activated carbon
filter and the UV lamp.
Safety Micro-Switch (Interlock Switch)
This air purifier is equipped with a safety interlock switch (Micro-safety switch) that will turn the unit off if
the front panel is removed while the unit is running.
Easy Maintenance and Low Cost
When the electrostatic precipitator (Electronic cell) needs to be washed or the filters need to be replaced,
simply open the front panel and pull out the electronic cell or old filters and put the new or clean one in.
No screws, hooks or tools are required. The electronic cell captures small particles on aluminum plates
that are simply rinsed off in the sink. There are no expensive filters to replace.
Standby Power
In order to operate the electrical circuits while the power plug is inserted in the wall outlet, this product
consumes about 5.2W of standby power. For energy conservation, unplug the power cord when the
unit is not in use.
Model No.
Power Requirement
Rated Power
Fan Motor
Fan Speed
Noise Level
Negative Ion
UV Lamp
Cord Length
Dimensions
Weight
RespirAide 300T
120V, 60Hz, 0.71A
83W
120V, 60Hz
L-240m
3
/h, M-340m
3
/h , H-435m
3
/h
<55dB
3x10
6
pcs/cc
6W
2.5m
H82.8cm x W47.8cm x D23.2cm
27.7kg
Features
Specifications
