Failure
Solution
Eliminate the blocking or
replace the one-way valve
Replace capacitor
Replace motor
Replace motor
Light damaged
Power cord looses
One way valve and the air
ventilation entrance are not
tightly sealed
Leakage from the connection
of U-shaped section and
cover
The leaf damaged and
causes shaking
The motor is not tightly
hanged
The body is not tightly hanged
The distance between the
hood body and the hob too
big
Too much ventilation from
open doors or windows
Mounting bracket not firmly
fixed
Hood fastening screws not
firmly tightened
16. Problem shooting Cooker hoods
The internal with of motor off or a bad smell
from the motor
Beside the above mentioned, check the following:
Replace lights
Connect the wires as per the electric
diagram
Cause
One flapp of the one-way valve is blocked.
One-way valve not installed correctly
The capacitor damaged
The motor jammed bearing damaged
Light does not
work, motor does
not work
Tighten the screws on the mounting
bracket securely
Tighten the fastening screws firmly
English
Installation- and Operating Instruction Cooker Hoods
Light on, but
motor does not
work
Oil leakage
The hood is instable
Insufficient
suction
Lower the position of the hood
Choose a new place and resemble the
machine
Take down the one way valve and seal
with glue
Take U-shaped section down and seal
with soap or paint
Shake of the
body
Replace the leaf
Lock the motor tightly
Fixed the body tightly
GB
fi200813
1
1
