A
Low speed
B
Mid speed
C
High speed
D
Light
E
Timer
F
Power ON/OFF
English
Installation- and Operating Instruction Cooker Hoods
15.
Appliance operating
Key- / Switch functions
1. After you have connected the cooker hood to the mains supply, all the outputs will close, all indicator
lights of the buttons will light on for 2s to indicate the state, and the cooker hood will enter to standby
state.
2. Power on: Press the power button
F
once, its indicator light will light up, the hood works at low
speed. Indicator light of low speed button will be bright. Press the power button again, both button
indicator lights extinguishes, the power button
F
and low speed button
A
will be off. The hood enters
into standby mode.
The speed buttons
A B C
and light button
D
can work separately and are not controlled by the power
button
F
. Press certain function button, the hood will work at that function status. Press the power
button at any status will close all function operation.
3. Press the light button
D
once; the light will turn on, and indicator light of light button and power
button will be on as well. Press the light button
D
again to turn off the lights.
4. 4.1 Press the Low button
A
, the indicator light lights up and will beam, and the motor runs at low
speed. Press Low button
A
again and the motor will stop, the button indicator light goes out and will be
off.
5. The Timer button
E
is usable for the switch off delay function only when a speed button and the lamp
button
D
is in use. Press the Timer button once to enter to switch off delay status, its indicator light will
light up. The cooker hood will run for 5 minutes and then turn off automatically, the lamps will be off as
well, all the button indicator lights will extinguish. The cooker hood enters to standby mode.
4.2 Press the Medium button
B
, the button indicator light lihts up and beam and the motor runs at
medium speed. Press button
B
again and the motor will stop, the button indicator light goes out.
4.3 Press the High speed button
C
, the button indicator light lights up and the motor runs at high speed.
Press button
C
again and the motor will stop, the indicator light goes out.
4.4 Low speed, mid speed and high speed cannot work at the same time. When the hood is at high
speed, press low speed, it will turn to low speed at once; when it is at low speed, press middle speed, it
will turn to middle speed immediately, and so on.
GB
A
B
C
D
E
F
fi200909atl
10