
15
You must install the
V-FLAPS
, when you run the appliance in extraction mode. The covers
protect the motor from the outdoor air and draught.
View of segment of an exhaust hose
Depending on model the lower chimney can be fixed with screws.
MOUNTING OF THE V-FLAP
If the cooker hood does not have an assembled V-FLAP1, you should mount the half-parts to its
body.The images only show an example of how to mount the V-FLAP, because the outlet may vary
according to different models and configurations.
To mount the V-FLAP 1 you should:
• Mount two half-parts 2 into the body 6
• the pin 3 should be top oriented;
• the axis 4 should be inserted into the holes 5 on the body;
• repeat all the operations for the 2nd half-part.
Содержание CH 22035 IXA
Страница 12: ...12 Abb 1 ...
Страница 39: ...10 fig 1 Extractor hood components ...
Страница 56: ...27 10 TECHNICAL DATA Technical data you can find on the Data sheet attached to this manual ...