Respekta AB120-33, Руководство пользователя

Страница: 32 / 75

32
Catalytic Panel *
It is located behind the wire racks of the oven, at the right and left walls
of oven cavity. Catalytic panel removes offensive odour and provides using
your appliance at its best performance. Over time, oil and food odours
permeate into enamelled oven walls and heating elements. Catalytic panel
absorbs any food and oil odours, and burns them during cooking to clean
your oven.
Detaching catalytic panel
To remove catalytic panel; first remove the wire racks. Once wire racks
are removed, catalytic panel will be free. It is advised to replace the
catalytic panel once every 2-3 years.
Rack Positions
It is important to place the wire grill into
the oven properly. Do not allow wire rack to
touch rear wall of the oven. Rack positions
are shown in the next figure. You may place
a deep tray or a standard tray in the lower
and upper wire racks.
Installing and removing wire racks
To remove wire racks, press the clips shown with arrows in the figure,
first remove the lower, and than the upper side from installation location.
To install wire racks; reverse the procedure for removing wire rack.
Rack 4
Rack 3
Rack 2
Rack 1
GB