ResMed MIRAGE NV 2 Series, Руководство для клиницистов

Страница: 8 / 51

6
F
OREHEAD
P
AD
C
LIP
A
SSEMBLY
The
M
IRAGE
NV F
ULL
F
ACE
M
ASK
S
ERIES
2
is supplied
with a forehead pad clip assembly kit. This kit is an
optional accessory. It is for the minority of patients who
may require additional support and stability. For
assembly instructions, see section on Reassembling the
Mask (step 3).
W
ARNING
The forehead pad clip assembly is for single-patient
use only.
Note: When the mask is fitted with a forehead pad clip
assembly attached, the forehead pad should lightly
touch the patient’s forehead without the mask putting
pressure on the bridge of the nose.
R
EMOVING THE
M
ASK
To remove the
M
IRAGE
NV F
ULL
F
ACE
M
ASK
S
ERIES
2
,
release the lower Velcro straps and pull the mask and
headgear up over the patient’s head.
Note: The Quick Release Tab should be used to remove
the mask only in the event of an emergency.
Q
UICK
R
ELEASE
T
AB
The Quick Release Tab (Fig. 8)
allows the mask to come away
from the face quickly in the
event of an emergency.
Simply pull the Quick Release
Tab and the rear Velcro
opening of the headgear
separates, allowing you to
remove the mask from the
face.
Note: The Quick Release Tab should be used to remove
the mask only in the event of an emergency. Overuse
of the Quick Release Tab will result in the
deterioration of the Velcro opening.
Figure: 8
Forehead
pad clip
Forehead
pad
Figure 7: Forehead Pad Clip Assembly