Resident Audio T4, Руководство по эксплуатации, Страница: 8 / 14

When a connection is made to Output jack 4, the T4
automatically sets all output levels to 0 (i.e., all sound is
muted). To set individual output levels, use the T4 Digital Panel
software.
Whichever mode you use, the T4’s front panel Input Mix knob always allows you to blend live input signal
along with output signal. However, in Multichannel Mode, no input signal is passed through to the T4
Output jacks (though it is sent, combined with the output signals, to the PHONES jack).
8
Headphones
The T4 provides a dedicated PHONES jack on the rear panel for private monitoring in either stereo or
mono.
(See Smart Monitoring on page 11 in this manual for more information.)
When operating in Stereo
Mix mode (i.e., only Output jacks 1 & 2 connected), you can also use Output 3 as a stereo headphone
output; however, when headphones are plugged into the Output 3 jack, Outputs 1 & 2 are muted
(although this has no effect on signal flow to your computer). If you want to be able to continue
monitoring the T4 over speakers while listening over headphones, plug them into the PHONES jack; if
you want to mute the sound coming from your speakers when listening over headphones, plug them into
the Output 3 jack. If desired, you can use two pairs of headphones simultaneously, one plugged into the
PHONES jack and the other plugged into the Output 3 jack. The front panel Big Knob monitor control
always affects headphone level, regardless of whether you are using one or two pairs of headphones.
When a connection is made to Output jack 4, the T4 automatically enters Multichannel mode. In this
mode, four discrete monophonic output signals are delivered from your computer to the corresponding
four output jacks (i.e., signal assigned to your computer software’s output 1 is routed to T4 Output 1,
signal routed to your computer software’s output 2 is routed to T4 Output 2, etc.). In Multichannel mode,
the Big Knob controls headphone level only, and has no effect on output levels; to set individual output
levels, use the T4 Digital Panel software installed into your computer during driver installation.
(See Using the T4 Digital Panel on page 9 in this manual.)
Resident Audio T4 Operation Manual : Making Connections