Resident Audio T4, Руководство по эксплуатации, Страница: 11 / 14

11
SMART MONITORING
The T4’s unique Smart Monitoring provides a level of convenience that you won’t find in other audio
interfaces.
Here’s how it works: When the T4 is in Stereo Mix mode and an INST/LINE switch is set to the LINE
position, the corresponding pair of inputs (1 & 2 or 3 & 4) send signal to Outputs 1 & 2 and to the
PHONES output (as well as to Output 3, if headphones are connected) in stereo, as you would expect.
However, when an INST/LINE switch is set to the INST (Instrument) position, the corresponding pair of
inputs send signal to Outputs 1 & 2 and to the PHONES output (as well as to Output 3, if headphones
are connected) in mono. This allows you to remove one set of cans and still hear the sound of everything
in one ear—especially handy for vocalists and DJs.
Note that the setting of the INST/LINE switch affects input monitoring even when only microphones are
connected to the T4. In this case, set the INST/LINE switch for each pair to LINE if you want to monitor
the incoming mic signal(s) in stereo, or to INST if you want to monitor in mono.
The setting of the INST/LINE switches affect input signals only (i.e., signal coming from connected
microphones, instruments or line-level devices) and has no effect on output signals (signals coming from
your computer).
Resident Audio T4 Operation Manual : Smart Monitoring
When the T4 is in Multichannel mode (i.e., Output 4 connected), Smart Monitoring only affects input signal
going to the PHONES jack and has no effect on signal going to the four Output jacks.