Resident Audio T4 Скачать руководство пользователя страница 14 | Manualshive

Страница: 14 / 14

Resident Audio T4 Скачать руководство пользователя страница 14

SPECIFICATIONS

Connectors

Input:

4 x Combo XLR mic / balanced ¼" TRS, line / instrument level

Output:

4 x balanced ¼" TRS line-level, 1 x stereo ¼" headphone output

(optional second headphone output via

Output 3)

MIDI:

Input / Output | Thunderbolt™ port: 1 (bus-powered)

Trim:

4 (1 per channel) with 0 to +35 dBu mic gain range

LED clip indicator:

4 (1 per channel)

Line / Instrument switch:

2 (Inputs 1 & 2 / 3 & 4)

Phantom Power:

On/Off +48V (global for all channels)

Input Mix:

Blends live input signal with computer output signal

Big Knob (volume control):

Controls headphone level and monitoring level (Stereo Mix mode only)

Controls

Preamps:

2 per channel, mic / instrument

Chassis:

Aluminum/Acrylic

A/D/A converters:

More than 100dB dynamic range

Hardware

Stereo or Mono:

Selected by Line/Instrument switch

Stereo Mix mode:

All inputs and outputs to Outputs 1 & 2 plus Output 3

Smart Monitoring

Audio

Bit resolution:

24-bit

Sampling rates:

44.1, 48, 88.2, 96 kHz

Mac® & Windows® compatibility:

Recommend Mac OS X 10.9 Mavericks or above, Windows 8 or higher

Supports:

ASIO, Core Audio, Windows Audio Session API (Windows 8)

Dimensions:

10.6 (w) x 4.4 (d) x 1.8 (h) in.

Weight:

2.3 lbs

14

Resident Audio T4 Operation Manual : Specifications

Note

: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.These limits are designed to provide reasonable

protection against harmful interference in a residental installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular Installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of
the following measures:
• Reorient or relocate the recieving antenna
• Increase the separation between the equipment and the receiver
• Connect the equipment into an outlet on a circuit different from that to which the reciever is connected
• Consult the dealer or and experienced radio/TV technician for help

WARNING: Changes or modification to this unit not expressly approved by the part responsible for compliance could voide the user’s authority to the equipment.

«
...
12
13
14

Содержание T4















Отзывы:

Нет отзывов