Copyright 2019 Rescue 42, Inc.
The Ripper™- 1 Owner’s Manual
Page
5
shatter, it is Laminated Glass and you must cut it with the Ripper™ blades. You may remove the resqme® from The
Ripper™ for breaking glass and cutting seatbelts by pulling it firmly away from The Ripper body.”
Turning On/Off the LED Light
The Ripper™ is equipped with an integrated LED flashlight. It is operated by pressing the bottom on the flashlight
housing (photo 4).
Photo 4
Replacing the Battery in the LED Light
Remove the battery by using the provided Allen wrench; purchase a replacement at most retail stores. Replace battery
and reinstall using the same Allen wrench. Careful not to overtighten.
Setting Pivot Friction
The Ripper™ is designed to be used by right or left-handed people. It can be operated with one hand or two. It is
capable of cutting at any angle. The Ripper™ can pivot 360 degrees and does not have a travel stop. This enables the
operator to turn the tool in any direction or cut glass from any angle. The operator can adjust the friction on the pivot
mechanism to their individual liking by tightening or loosening the friction adjustment bolt with the provided 5/32” Allen
wrench (photo 5).
Photo 5
