Rescue The Ripper R1 Скачать руководство пользователя страница 4

Copyright 2019 Rescue 42, Inc. 

                The Ripper™- 1 Owner’s Manual 

Page 

 

Ripper™ drive shaft and the interface cone will be snug against the front housing of the impact driver (photo 2).  
Check this by pulling The Ripper™ Body forward to test that it is properly connected to the impact driver. 

7.

 

Move the retaining strap into position (photo 2); pull until taught and press Velcro® strap surfaces together. 

8.

 

Install the battery and you are ready to cut glass. 

 
Photo 2 

 

Disconnecting from an Impact Driver 

To disconnect The Ripper™ from an impact driver follow these steps: 

1.

 

Clean any glass dust or fragments off The Ripper™ and impact driver. 

2.

 

Remove the battery from the impact driver. 

3.

 

Loosen The Ripper’s™ retention strap and move it out of the way. 

4.

 

Rotate The Ripper’s™ interface cone until the hole in the top of The Ripper aligns with the removal access port, 
and the impact driver’s sliding hex locking device is visible.  Using either your finger or the provided flat-bladed 
screw driver (photo 3), slide the hex locking device of the impact driver forward (away from the front of the 
impact driver).  At the same time pull The Ripper™ off the impact driver.  Be cautious of the blade tips as The 
Ripper™ body comes off the impact driver; the attachment may release quickly causing it to suddenly separate.  
Use caution not to strike someone or something with the blade tips. 

 
Photo 3 

 

 

Using the resqme® Glass Punch/Seatbelt Cutter

 

The Ripper™ features a resqme

®

 

tool that can punch safety glass or cut a seat belt, making The Ripper™ capable of 

removing any commonly found vehicle side window glass.  The resqme® won’t break commonly found windshield glass.  
Simply slide the resqme® in/out of its holder on The Ripper™.  To remove side window glass with the integrated 
resqme® tool, turn The Ripper™ until the black tip of the resqme® is pressed against the glass.  Push against the glass 
until you hear a click. If the glass doesn’t shatter repeat twice more.  If the glass shatters, it is Tempered Glass, and you 
can use The Ripper to sweep the window frame free of glass particles and access the interior. If the window doesn’t 

Содержание The Ripper R1








Отзывы: