14
4 Operation
4.11 Start and use
1. Press the function button twice to start filling
and heating of the wash tank.
• Once the wash tank reaches the correct
temperature the Green indicator light will
come on indicating the machine is ready to
be loaded and a wash cycle selected.
• Cleaning at a too low temperature
increases the risk of foam forming inside
the machine.
2. Select a cleaning program by pressing (3) or (4).
3. Once the machine is done cleaning “END”
appears on the LED display and the green
indicator light comes on.
4. “End” disappears from the display once the
door is opened for unloading. The button for
the last program chosen will remain lit until the
next program is selected.
5. Masks should be rinsed inside and out under
running water to ensure there is no detergent
residue left in them before being sanitized by
hand for re use.
6. Keep the door closed unless you plan to use
the machine again immediately. This saves
energy and reduces any condensation.
Stopping the machine during operation
In an emergency, press the stop button (2).
Figure 14: Once the program is complete, the green
light is lit.
Figure 13: During the wash cycle the red indicator
light will be on. Do not open the door when the red
light is on.
NOTE
If the machine is stopped in the middle of a program,
items may have detergent residue on them. Run
a complete wash program before the items are
unloaded or the water is drained from the machine.
WARNING
Do not open the door during a cleaning program (red
light on) due to risk of scalding!
REMARQUE
Si la machine est arrêtée au milieu d’un programme,
des résidus de détergent risquent de rester sur
les articles. Démarrez un programme de lavage
complet avant de décharger les articles ou de vider
l’eau de la machine.
REMARQUE
Il ne faut pas ouvrir la porte pendant un programme
de lavage (voyant rouge allumé) en raison du risque
de brûlures!
