4
Always charge batteries of the same type, size and capacity at the same time.
It is recommended to connect the charger to the batteries using croco clips.
Connect the charger to a 230V mains socket.
The charging process will start automatically and it will stop after the charging is
complete.
The process of charging is indicated by the red colour on the LED indicator.
As soon as the batteries are fully charged, the LED indicator will turn green. At this
time, you can remove the batteries from the charger.
Please do not interrupt the charging cycle before it stops automatically. Also
please do not disconnect the battery before the charging cycle has stopped.
If the battery is damaged or if any other defect occurs, the LED indicator starts to
flash (red/green). If the polarity is reversed, the charger will not start the charging
process.
Maintenance, care and disposal:
It is not necessary for the user to clean, adjust or repair any part of this device, and
therefore do not disassemble the charger under any circumstances. Please use only a
dry antistatic cloth for cleaning. Never use aggresive cleaning agents or solvents. Also
please disconnect this device from the power supply before cleaning.
In the interest of nature protection and possible reuse of raw
materials, take the damaged or unused device to a collection point
for electrical scrap. The symbol of the crossed-out wheeled-bin
informs the user, that he/she is obliged to hand over the product
marked in this way to a collection point for electrical scrap, so that
the waste can be disposed of ecologically and usable raw materials
can be used for further production.
The user is obliged by law to return empty or damaged batteries to places designated
for this purpose, such as a shop or a place for collecting raw materials. It is forbidden
to dispose of batteries together with municipal waste! Therefore, a symbol is placed
on all batteries and accumulators to draw attention to these waste management
laws. Important for marking is the content of heavy metals – either Cd = Cadmium,
Hg = Mercury or Pb = Lead. This mark of chemical composition can be found under
the crossed-out wheeled-bin symbol.
Warranty conditions:
RESACS s.r.o. provides a warranty for a period of 24 months from the date of sale
of the product to the final user.
