Reset Button
Reset will be initiated when the reset button is pressed once and Power
LED begins to flash.
Factory Reset will be initiated when the reset button is pressed
continuously for three seconds or when Power LED begins to light up.
Release the reset button and the Power LED will begin to flash
indicating the Wireless Internet Camera is changing to factory reset.
When factory reset is completed the Wireless Internet Camera will be
set to default on channel 11 and EES-ID is set as “NULL String” (This
default setting will let the Wireless Internet Camera connect to ANY
access point on the infrastructure network). The IP address will also
return to the default setting as 192.168.0.20.
Slide Switch
The slide switch permit user’s to determine the type of network
communication media for the Wireless Internet Camera and is
positioned on the rear panel. The three settings are as follows:-
•
LAN (Local Area Network)
•
LAN/WLAN (Local Area Network/Wireless Local Area
Network)
•
WLAN (Wireless Local Area Network)
I/O Connector
There are four I/O connectors, two for input and two for output situated
on the rear panel. The I/O connectors provide the physical interface to
send and receive digital signals to a variety of external alarm devices.
Please refer to the User’s Guide appendix for detailed information
.
Antenna Connector
There are two SMA type antenna connectors located at the rear panel of
the Wireless Internet Camera providing connection for two high
sensitivity antenna included with the device.
