Web Configuration
Installation
This section describes the Software installation procedure of the
Wireless Internet Camera for Web Configuration and IPView
application.
The Wireless Internet Camera must be configured through its built-in
Web-based Configuration.
Extensive knowledge of LAN will be helpful in setting up the Wireless
Internet Camera
From the web browser enter the default IP address to access the
Welcome screen of the Wireless Internet Camera to configure your
Wireless Internet Camera type http ://192.168.0.20 in the address box.
The number is the default IP address of your Wireless Internet Camera.
Press Enter.
Note:
The PC’s IP address must correspond with the Wireless Internet
Camera’s IP address in the same segment for the two devices to
communicate.
The Welcome screen will appear with a still image as illustrated
below. Select
“System Administration”
to configure the Wireless
Internet Camera.
