Hardware Installation
This section describes the Hardware installation procedure for the
Wireless Internet Camera.
1 Attach Wireless Antenna
From the rear panel of the Wireless Internet Camera
screw the 2 external Antenna that came with the
Wireless Internet Camera into the antenna connector..
2 Configure Network Communication
From the rear panel of the Wireless Internet Camera
select the desired Network communication for the
Wireless Internet Camera from the Slide Switch.
Position the Slide Switch to the setting required
either LAN or LAN/WLAN position.
Please refer to the Physical Description
section for detailed information.
3 Connect an Ethernet cable
Connect an Ethernet cable to the network cable
connector located on the Wireless Internet Camera’s
rear panel and attach it to the network.
4 Attach the external power supply
Attach the external power supply to the DC power input
connector located on Wireless Internet Camera’s rear panel
and is labeled DC 5V and connect it to your local power
supply.
Note:
Confirm power source is supplied from the LED
indicators label Power is illuminated.
