Repotec RP-WR5822, Руководство пользователя

Страница: 317 / 336

802.11ac WLAN Router User’s Manual
Open the Control Panel window, and then click the Network icon.
Select the network component labeled TCP/IP, and then click Properties .
If you have multiple TCP/IP listings, select the listing
associated with your network card or adapter.
In the TCP/IP Properties dialog box, click the IP Address tab.
Click the radio button labeled Obtain an IP address automatically .
Click the DNS Configuration tab, and then click the radio button labeled Obtain an IP address
automatically .
Click OK twice to confirm and save your changes.
You will be prompted to restart Windows.
Click Yes .
Windows NT 4.0 workstations
First, check for the IP protocol and, if necessary, install it:
1. In the Windows NT task bar, click the Start button, point to
Settings , and then click Control Panel .
In the Control Panel window, double click the Network icon.
In the Network dialog box, click the Protocols tab.
The Protocols tab displays a list of currently installed
network protocols. If the list includes TCP/IP, then the
protocol has already been enabled. Skip to step 9.
If TCP/IP does not display as an installed component, click Add…
In the Select Network Protocol dialog box, select TCP/IP , and then click OK .
You may be prompted to install files from your Windows NT
installation CD or other media. Follow the instructions to
install the files.
After all files are installed, a window displays to inform you
that a TCP/IP service called DHCP can be set up to
dynamically assign IP information.
Click Yes to continue, and then click OK if prompted to restart your computer.
Next, configure the PCs to accept IP information assigned by
the Wireless Gateway:
Open the Control Panel window, and then double-click the Network icon.
In the Network dialog box, click the Protocols tab.
In the Protocols tab, select TCP/IP , and then click Properties .
In the Microsoft TCP/IP Properties dialog box, click the radio button labeled Obtain an IP address
from a DHCP server.
Click OK twice to confirm and save your changes, and then close the Control Panel.
Assigning static Internet information to your PCs
If you are a typical user, you will not need to assign static
Internet information to your LAN PCs because your ISP
automatically assigns this information for you.
In some cases however, you may want to assign Internet
information to some or all of your PCs directly (often called
“statically”), rather than allowing the Wireless Gateway to assign
it. This option may be desirable (but not required) if:
•
You have obtained one or more public IP addresses that
you want to always associate with specific computers (for
317