4
Dip switch function
This unit is equipped with dip switches, located on the front panel. Adjusting the dip switches
will change the default function of this unit. This unit has set to manufacturer default as: SFP
speed 1000M and LFP function OFF.
The table shown as you may change the dip switch setting to your desired environment.
LED indicator
Dip 1
OFF
LFP function turn off (Default)
ON
LFP function turn on
Dip 2
OFF
SFP Speed 1000M (Default)
ON
SFP Speed 100M
PWR (Green)
ON – Power is detected
OFF – Power is not detected
SFP Lnk/Act (Green)
ON – FX port is detected
Flashing – FX data is
transmitting/receiving
Lnk/Act (Green)
ON – TX link is detected
Flashing – TX data is
transmitting/receiving
