Repotec RP-1716RT, Руководство пользователя

Страница: 11 / 14

Rack Mounting the Switch in the 19-inch rack:
1. Disconnect all cables from the switch before continuing.
2. Place the unit the right way up on a hard, flat surface with the front
facing toward you.
3. Locate a mounting bracket over the mounting holes on one side of the
unit.
4. Insert the screws and fully tighten with a suitable screwdriver.
5. Repeat the two previous steps for the other side of the unit.
6. Insert the unit into the 19" rack and secure with suitable screws (not
provided).
7. Reconnect all cables.
3.1.3 Installing Network Cables
After placing the switch on the desktop, then we need to know how to connect
the device to network.
3.1.3.1 Station Connections with Twisted-Pair Cable
Connect each station to the switch by a twisted-pair straight cable
(10BASE-T or 100BASE-T cables). Plug one RJ-45 connector into a
front-panel port of the switch, and plug the other RJ-45 connector into
the station’s network adapter.
3.1.3.2 Switch to Switch Connections with Twisted-Pair Cable
In making a switch to switch connection, you could use any port to
connect another switch with straight or cross-over cable. As all the
ports support auto MDI-X function, so the connection is independent of
cable type and using a straight cable to make a switch to switch
connection is allowed.
11