Repotec RP-1716RT, Руководство пользователя

Страница: 10 / 14

10
3. Installing And Using 16-Port NWay Switch
3.1 Installing The 16-Port NWay Switch
The switch does not require software configuration. Users can immediately use any
of the features of this product simply by attaching the cables and turning the power
on.
3.1.1 Desktop Installation
Locate the switch on the desktop and place the switch on a clean, flat desk or
table close to a power outlet. Plug in all network connections and the power
cord, then the system is ready.
When deciding where to put the switch, you must ensure:
It is accessible and cables can be connected easily
Cabling is away from:
＊
Sources of electrical noise such as radios, transmitters and
broadband amplifiers
＊
Power lines and fluorescent lighting fixtures.
Water or moisture can not enter the unit
Air flow around the unit and through the vents in the side of the case is
not restricted (company recommend that you provide a minimum of 25
mm clearance)
To prolong the operational life of your units:
Never stack units more than eight high if freestanding.
Do not place objects on top of any unit or stack
Do not obstruct any vents at the sides of the case
3.1.2 Rack-Mount Installation (Rack-mount kit is optional)
The switch may standalone, or may be mounted in a standard 19-inch
equipment rack. Rack mounting produces an orderly installation when you
have a number of related network devices. The switch is supplied with optional
rack mounting brackets and screws. These are used for rack mounting the
unit.