KrosFlo® TFF System
–
Auxiliary Scale ACSS-20K
User Guide
28 repligen.com 420-14871-001 Rev. 00
7.
In order to finish the process, press
key, text
<Prnt?>
(Print?) is displayed.
8.
Press
key, total mass value of all recorded weighing is printed on a scale-connected
printer.
Figure 12. Totalizing printout example
9.
In order to print the report once again press
key.
10.
To exi
t “report printout mode” press
key. As a result, the home screen of
<Add>
working mode is displayed and all the data get zeroed automatically.
Note:
If the display capacity is exceeded (i.e. there is not enough space for all the digits of the
weighing result)
<Hi>
error is displayed. In such a case either remove the ingredient from a
weighing pan and finish the totalizing process or place load of a lower weight value on the
weighing pan.
18.
Working mode
–
Animal Weighing
Animal Weighing is a working mode enabling to weigh products that disrupt efficient establishing of
stability. It is mostly intended to measure weight of animals.
18.1
Local settings
To go to local settings, enter
<3.7.AnLS>
submenu.
Table 18. Animal Weighing
–
Local settings
Submenu
Setting
3.7.1.Acc
Working mode accessibility
3.7.2. Aut
Averaging time
3.7.3.Lo
Lo threshold
18.2
Animal Weighing operation
1.
Enter
<AnLs>
working mode (Animal Weighing).
2.
First, text
<tinnE>
is displayed for 1s, next you see a window for setting duration (in seconds)
of animal weighing.
3.
Press
key, parameter values are displayed successively one by one, where: 5[s], 10[s],
20[s], 30[s], 40[s], 50[s], 60[s].
4.
Set the respective value, press
key to confirm, weighing result window with
A
letter is
displayed.
