repabad Vision 1000, Руководство по эксплуатации

Страница: 13 / 28

13 0022771-01_BEDWHPV.1 12/2021 •
repa
BAD GmbH • We reserve the right to make technical changes. All dimensions in cm.
Further functions
Opens the massage programs. When first pressed, the P1 Vital programme.
Keep pressing to cycle through the programmes (P2, P3, P4, etc.). The programme
selected is started automatically if you do not press again for approx. 3 seconds.
The respective programme number is shown on the display. The programme takes
approx. 15 minutes.
Any active massage or programme is switched off first. Select the programme again by
pressing again. The key is illuminated while the programme is running. Functions
activated by the programme are indicated by the , and keys, which are lit up
accordingly. The current programme can be terminated at any time by pressing .
Press once to turn on the LED whirlpool lighting (optional).
Press again to set the next colour.
After pressing for a sixth time, the colours begin to change automatically, starting with
magenta. Press again while the colours are alternating to choose the colour. The key
flashes slowly. Press again to restart the colour change process. Press and hold again to
switch off the LED coloured light.
Press and hold to turn off the LED whirlpool lighting.
Switches fresh water rinsing (special accessory) on and off when the tub is empty
(please refer to page 18).
Switches the disinfection system (special accessory) on and off when the tub is full
(press and hold the key for at least 5 seconds, please refer to pages 16/17).
The key is illuminated when the (special accessory) fresh water rinsing or the disinfec-
tion system is activated.
The keylock is activated when the
key flashes, irrespective of which key is pressed.
All functions are blocked.
Keylock
The keylock can be activated to prevent accidental or unauthorised activation of whirlpool func-
tions (e.g. by children).
Activating the keylock:
Press the air massage key until
--
is shown on the display ( is illuminated).
Deactivating the keylock:
Press the air massage key until a temperature is shown on the display ( is illuminated).
The current keylock status is maintained even if it is disconnected from the electrical power supply.
Operation