Operating Instructions
REOTRON SMP
6
ELEKTRONIK
6.4 Displays
During normal operation “run“ is displayed on the LED panel. In the programming mode a shortened
description of the function is displayed. New settings are upon when leaving the programming mode or if
no keys are pressed for 30 seconds delay, then the settings will be saved.
6.4.1 Operating modes
Normal operation
No unit enable
Unit stopped by using the “O-Key“
Illuminated left-hand, decimal point in the display. Current regulation, maximum
current for the unit or the selected current limit has been reached.
6.4.2 Fault displays
Over temperature
Input voltage too high
Input voltage too low
