Renson Fixscreen 100 Solar, Руководство по установке

Страница: 18 / 28

18
en
Fixscreen
®
100 Solar
• We strongly advise to secure the box to the construction by using counter sunk screws and
avoid each contact with the fabric on the left hand side and right hand side
• Always secure the box as close as possible at the groove.
In case of a width > 3 m, extra fixation of the box in the middle is obligatory.
• The fixation needs to be done on the extremities of the box, as close as possible towards the
side brackets of the box and in the middle of the width of the screen.
• Use counter sunk screws to seal the box.
4
If the box is completely fixed (on the structure), you need to
mount the fabric roller. You need to do this with two persons!
Support the bottom bar while doing this. Put the shield
plate back in the cabinet with the 2 Torx screws using tool
T20. Make sure the shield plate avoids contact between the
cable and the fabric roller (this last step is not required for a
separate solar panel)
. Then, slide the front cover on the box.
Warning!
Slide the fabric roller left and right into the slides
simultaneously.
5
Slide the fabric into the internal HPVC channel.
Check if the side channels are facing the right direction!
The V cut-out is positioned at the top of the side channel and the
clicker is positioned at the bottom of the side channel.
6