Twist-A-Mini
™
Manual
Page 23
Using the Twist-A-Mini
™
Practice etching and grinding
Practice can help avoid costly and disappointing mistakes . Before
undertaking your first Twist-A-Mini
™
project, practice on scrap material that
is the same as the material you will use for that project . This will help you
select the speed that will produce the best result .
Follow the steps below to practice with your Twist-A-Mini
™
.
Part
Action
1
On scrap material, draw a guide or pattern similar to your
intended project .
2
Fit the selected bit into the collet .
Refer to
Installing bits
on page 16 .
3
Set the Variable Speed Dial to the appropriate speed .
Refer to
Changing the Variable Speed Dial
on page 22 .
4
Hold Twist-A-Mini™ firmly with both hands. Take care not to
block the air vents . Use a light touch . Let the Twist-A-Mini
™
do the work . You just need to guide the tool .
