Renova moviroll MRE 100 L, Руководство по эксплуатации

Страница: 6 / 24

6
Please do not throw away the wood packaging of your
moviroll as it might be useful for storage purposes, when
moving or, in case of damages, when the device must be sent back to Renova srl.
SERIAL NUMBER
Each
moviroll is provided with its serial number.
Please find the serial number of your
moviroll stamped on the moviroll
frame, above the rear wheel.
Example in the picture on the right.
Please find the serial number also on the warranty sheet provided with the
moviroll .
IMPORTANT:
Always communicate the serial number when requiring assistance or spare parts for your moviroll .
instructions for use
▪
Unpack the appliance and store the packaging material
▪
After unpacking, make sure that the appliance is intact with no visible signs of damage caused by transport. If in
doubt, do not use the appliance and contact Renova srl
▪
Place the moviroll on a safe and flat surface that can support its weight
▪
Insert one battery into the special chassis. Previous recharge of the battery is not necessary
▪
A permanently lit red LED indicates that the appliance is ready to be used
▪
Now select the forward gear - - or the backward gear – (emergency)
▪
To start using the MRE L / MRE LP / MRE LPT moviroll to handle rolls just spin the accelerator handle.
▪
Push the switch into OFF position when the moviroll is not running in order to preserve the battery charge
PLEASE NOTE:
The moviroll battery roll pusher is equipped with reverse gear. Please use the reverse gear to release the moviroll
from the roll, when the moviroll remains locked beneath the roll weight because of an obstacle or a wrong
maneuver.
TILTING HANDLE
moviroll models are also equipped with tilting handle.
When the working space is small, the operator can work
alongside the load only turning the handle and 'pull' the load
instead of thrusting it.
▪
Pull outward the spring stopper (position
1 in the picture) to overturn the handle
▪
Overturn the handle until the handle locks
▪
Pull outward the spring stopper and push back the handle
to unlock the handle and to bring it to its original position
BATTERY STATUS