RENOLD jPM 17 A 71 2.0 R 30, Инструкция по установке и обслуживанию, Страница: 4 / 24

def
jPM Series
Gears
INSTALLATION & MAINTENANCE GUIDE
4
1. UNIT DESIGNATION CODE
If further information of after sales service is required, please have the following information at hand.
- Order No.
- Unit Designation Code
Examples
jPM - MOTORISED UNIT
jPM 17 M 71 2.0 R 30
jPM Unit size 17 (4 sizes - 17, 22, 26 & 30)
M Motorised unit
71 Motor frame size 63, 71, 80, 90, 100, 112
2.0 Unit mounting detail (see Appendix A)
R Unit handing (see Appendix A)
30 Ratio
jPM - MOTOR READY UNIT - to suit free issue motor
jPM 17 A 71 2.0 R 30
jPM Unit size 17 (4 sizes - 17, 22, 26 & 30)
A Motor ready unit to suit customers motor
All other details as above
jPM - REDUCTION GEAR OR SPEED REDUCER UNIT
jPM 17 H 2.0 R 30
jPM Unit size 17 (4 sizes - 17, 22, 26 & 30)
H Reduction gear type
All other details as above
2. GENERAL INFORMATION
The jPM Series of gear units are comprised of four sizes ranging from 1.75”-3” centres. The units can be
supplied either as reduction gears, geared motors, or as motor ready gear units for individual customers to
fit their own motors. Rated up to 397 Nm , in a ratio range from 5:1 up to 70:1.jPM Series as a single
reduction gear unit and offers a wide selection of mounting options and accessories to suit a wide and
diverse market.
The instructions which follow are to help you achieve the recommended installation procedure, ensuring
optimum performance, satisfaction and life from your Renold Gears jPM Series gear unit.
Prior to despatch, all units are tested and checked to ensure that they comply with the highest standards
required by our company. Also, a great deal of care is taken in the quality of packing and transport
arrangements, ensuring that the unit reaches its final destination in its original condition.
Renold Gears hopes that the supplied unit will fully meet your expectations.
3. WEATHER PROTECTION
All jPM Series gear units are protected to a standard capable of withstanding normal weather conditions.
Where it is probable that the unit will be subjected to adverse weather conditions, or where it is to be left
inactive for a long period of time, our sales team should be notified when the order is placed so that the
unit can be provided with the appropriate protection.