40
Communication
4
3
2
1
1. Insert the bare wires of the Drop Cables (sold separately) all
the way into the wire ports of the Drop Plugs (not included)
following the Drop Plug pinout. The red PS+ wires go to pin
1, the white CAN_H wires go to pin 2, the blue CAN_L wires
go to pin 3, and the black PS- wires go to pin 4.
2. Squeeze the crimp areas of the Drop Plugs with the Split
Joint Pliers.
3. Locate the drop tap (not
included) on the RV-C
bus that is the closest
to the charge controller
installation location. The
drop taps are usually
located above the entry
door, in the bathroom, or
under the bed in the RV.
CAUTION
z
If unable to locate the drop taps, please contact the RV manufacturer for help.
Inter-Device Communication
Monitoring Device Communication
