45
Users Manual
SERVICING and TROUBLE SHOOTING
GENERAL INFORMATION
Your RHAON empowered loudspeaker contains no user-serviceable parts and all service should be referred to qualified service person-
nel.
TROUBLE SHOOTING HINTS
GENERAL
Most setup and installation problems are “network problems” and not loudspeaker or RHAON problems.
Your RHAON empowered loudspeaker was factory tested before it left our factory and barring shipping damage should be in perfect oper-
ating condition.
Nevertheless, it is always a good idea to run a quick check on each loudspeaker before taking it out to the job site and installing it.
If you should run into a problem at the site, it’s good to know the problem is in the network or the system wiring and not in the loudspeak-
ers.
The Analog 1 input is always connected so it’s a simple matter to connect a line level analog signal to an array and check out its perform-
ance.
COMMON AUDIO PROBLEMS
Hum
The most common sources of system hum are the program source or an improper or poor ground on an audio signal line. Check the pro-
gram source to make sure the hum isn’t originating there. Carefully check all the audio connections to make sure they are properly made.
Noise
Most noise problems are the result of improper grounding or of noise being induced into the audio signal line from adjacent noise
sources, such as fluorescent lights, and close proximity of the audio signal lines to lines radiating noise. Carefully review all the audio
connections and turn off all the lights and any other suspected noise sources.
