Renkus-Heinz Iconyx IC16-R Скачать руководство пользователя страница 47

Страница: 47 / 64

CobraNet

The drawing below shows the signal paths for a RHAON system using CobraNet digital audio distribution.
Except for the analog audio input line to the CobraNet Converter, all audio signal runs are standard CAT5e cables. The network is a stan-

dard Ethernet star topology. CobraNet does not permit looping or “daisy chaining” from amplifier to amplifier. The maximum CAT5e cable

length between devices is 100 Meters (approximately 325 feet).

Notes

1. Satisfactory Ethernet switches of many sizes (output ports) are widely available from many sources. Managed switches are recom-

mended over unmanaged switches; 100 BaseT minimum, Gigabit (1000 BaseT) recommended.

2. The number of loudspeakers is determined by the number of output ports provided by the switches. The computer(s) can be connect-

ed to any Port on the Ethernet network.

3. Systems with CobraNet digital audio distribution require either a suitable Analog to CobraNet converter or a mixing console with a

CobraNet output. Suitable analog to CobraNet converters are available from a number of sources, such as Bi-Amp, Peavey and oth-

ers.

4. The RHAON network can easily be made redundant by connecting a duplicate of this network to the Secondary Ethernet Inputs on

each loudspeaker. Additional switches, analog-to-CobraNet converters, etc. would be required.

Analog Audio

Analog to

CobraNet

Converter

Ethernet

Switch

Ethernet

Switch

FOH

Stage

Left

FOH

Stage

Right

Under

Balcony

Loudspeakers

Upper

Balcony

Delay

Digital Console with

CobraNet output

APPENDIX II: RHAON Block Diagrams

Wiring diagram for a system using CobraNet for multi-channel digital audio distribution, loudspeaker control and monitoring.

Users Manual

IC-R

Содержание Iconyx IC16-R

































































Результаты поиска

Содержание Iconyx IC16-R

Отзывы:

Похожие инструкции для Iconyx IC16-R

Бренды по названию

Популярные бренды

Renkus-Heinz Iconyx IC16-R, Руководство пользователя

Результаты поиска

Содержание Iconyx IC16-R

Отзывы:

Похожие инструкции для Iconyx IC16-R

Бренды по названию

Популярные бренды