Renkus-Heinz Iconyx IC16-R Скачать руководство пользователя страница 4

Страница: 4 / 64

INTRODUCTION

Congratulations on your purchase of a Renkus-Heinz RHAON Empowered digitally steered ICONYX-R column loudspeaker. We

hope you enjoy it.

Your ICONYX-R steerable column loudspeaker was carefully tested and inspected before leaving our factory and should have

arrived in perfect condition. Please carefully inspect the shipping carton(s) and loudspeaker(s) for any noticeable damage, and if any

damage is found, immediately notify the shipping company. Only you, the consignee, may institute a claim with the carrier for any

damage incurred during shipping. Be sure to save the carton(s) and all packing material for the carrier’s inspection. It is also a good

idea to save the carton and packing material even though the loudspeaker arrived in good condition. If you should ever need to ship

the loudspeaker, it should be shipped in its original factory packaging.

TECHNICAL SUPPORT

If you have any questions about RHAON-Empowered Loudspeakers or encounter a problem designing, installing, setting up or oper-

ating a RHAON system, please call our technical support staff at 949-588-9997 and ask the operator for technical support on

RHAON. Call Monday through Friday from 8:00 AM to 5:00 PM Pacific Time.

The latest information on RHAON Technical Support is always available online at http://www.renkus-heinz.com/support/software-sup-

port/rhaon/e-mail.html. You will also find a support request form at http://www.renkus-heinz.com/support/request-

info/tech-info/index.html.

ICONYX-R ASSEMBLY INSTRUCTIONS

To simplify shipping and handling, ICONYX arrays are constructed from 8-channel modules and need to be assembled

in the field. The assembly hardware is packed with the modules in cardboard box(es) that double as carton “fillers”.

The ones containing the hardware are marked “Hardware” to prevent the hardware from being accidentally discarded.

If you purchased an

IC8-R

all you need to do is remove the column loudspeaker and its hardware box from the carton

and install it. Skip to page 6 for Address Number Verification instructions.

If you purchased an

IC16-R

or an

IC16/8-R

, you should have received two cartons and will need to assemble them into

a 16-channel unit. Each carton will include a hardware box.

If you purchased an

IC24-R

, you should have received 3 cartons (three 8-channel modules).

If you purchased an

IC32-R

or an

IC32/16-R

, you should have received 4 cartons (four 8-channel modules) and will

need to assemble them.

The cartons will be marked to show the modules’ position in the finished column array; for example, top, bottom, cen-

ter, etc.

In all cases, if you ordered a mounting hinge kit with the loudspeaker the female portions of the hinge assemblies will

have been installed on the modules for you. The male portions of the wall mounting hinge assemblies will be packed in

the hardware box(es). A dimensional drawing of the column array and paper mounting templates were included in the

plastic bag that contained this manual.

Note that the male sections have been set up to allow the column to swing to the right away from the wall. If you want

the column to swing to the left, you will need to change the location of the hinges from the right side of the wall mount-

ing plate to the left side.

Users Manual

IC-R

Содержание Iconyx IC16-R

































































Результаты поиска

Содержание Iconyx IC16-R

Отзывы:

Похожие инструкции для Iconyx IC16-R

Бренды по названию

Популярные бренды

Renkus-Heinz Iconyx IC16-R, Руководство пользователя

Результаты поиска

Содержание Iconyx IC16-R

Отзывы:

Похожие инструкции для Iconyx IC16-R

Бренды по названию

Популярные бренды