Users Manual
10
Wall Mounting Procedure
Each HK series hinge consists of two parts, a male mounting plate and a female mounting plate. The female hinge plates should be attached to
the loudspeakers. The male mounting plates attach to the wall. The proper number of mounting plates are included for the size of loudspeaker
ordered.
Each male mounting plate is provided with six mounting holes. At least four fasteners in each male mounting plate, suitable for the wall’s
construction, are needed to fully satisfy mounting needs and safely secure Iconyx loudspeakers to the wall.
1. Determine the desired height of the loudspeaker and mark the location of the male mounting plates.
2. Mark points on the wall where mounting screws will be positioned.
3. Using an appropriate drill bit, drill holes at the marked points.
4. Secure the mounting plate to the wall with fastener suitable for the wall’s construction.
5. Repeat until all male mounting plates are installed.
6. NOTE: The male mounting plate with an attached slotted locking strap can go in the top or bottom
location. The components of the mounting plate must be rearranged to fit when used in the top location.
7. The female mounting plates come pre-attached to the loudspeaker.
8. Lift the loudspeaker onto the hinge pins.
9. Secure the loudspeaker by attaching the metal locking strap to its top or bottom using the machine screw
provided.
10. Installation is complete.
Suspension Mounting (Flying)
The end caps of the column array are attached to the main frame with four M6 machine screws. Removing these screws and replacing them with
eye bolts provides up to four attachment points for flying. We recommend using all four. If only 2 are used the column will not hang straight. It will
either tilt up or down.
Tripod Stand Mounting
If you plan to use your Iconyx Gen 5 IC8-RN, IC16-8-RN or IC16-RN mounted on a heavy-duty tripod stand using the ICTRIPODKITR, be aware that
you must mount the top mounting bracket to the array before attaching the tripod socket to the bracket. Otherwise you will not have access to all
the bracket mounting screws.
