Renkus-Heinz ICL-FR, Руководство пользователя

Страница: 4 / 78

INTRODUCTION
Congratulations on your purchase of a Renkus-Heinz RHAON empowered digitally steered
Iconyx IC Live column loudspeaker. We hope you enjoy it.
Your Iconyx IC Live steerable column loudspeaker was carefully tested and inspected before
leaving our factory and should have arrived in perfect condition. Please carefully inspect the
shipping carton(s) and loudspeaker(s) for any noticeable damage, and if any damage is found,
immediately notify the shipping company. Only you, the consignee, may institute a claim with
the carrier for any damage incurred during shipping. Be sure to save the carton(s) and all pack -
ing material for the carrier’s inspection. It is also a good idea to save the carton and packing
material even though the loudspeaker arrived in good condition. If you should ever need to ship
the loudspeaker, it should be shipped in its original factory packaging.
TECHNICAL SUPPORT
If you have any questions about RHAON-Empowered Loudspeakers or encounter a problem
designing, installing, setting up or operating a RHAON system, please call our technical sup-
port staff at 949-588-9997 and ask the operator for technical support on RHAON. Call Monday
through Friday from 8:00 AM to 5:00 PM Pacific Time.
The latest information on RHAON Technical Support is always available online at http://www.
renkus-heinz.com/support/software-support/rhaon/e-mail.html. You will also find a support
request form at http://www.renkus-heinz.com/support/request-info/tech-info/index.html.
ASSEMBLY INSTRUCTIONS
To simplify shipping and handling, ICL-FR-DUAL and ICL-FR-TRIP arrays are shipped as
modules in separate cartons and need to be assembled in the field. All the hardware needed to
assemble the ICL-FR-DUAL or ICL-FR-TRIP is included in the cartons.
If you ordered a HK-ICL series mounting hinge kit with your ICL-FR array, the hinge hardware
will be packed with the other hardware.
In the following instructions, the term “module” is used to refer to one of the 8-channel sections
of the finished assembly, which is called a column or a column array.
Prepare an assembly area. Each module is 4 feet long, so you need a flat surface at least 8 feet
long to assemble the dual array; 12 feet for the triple array. We suggest covering the assembly
area with a heavy cloth or some other soft material to prevent damaging the finish on the cabi -
nets while assembling them.
Place the modules in their respective positions on the assembly area. Avoid resting the modules
on their grille. The modules are heavy and may deform the grille. Instead, rest the modules on
their sides or back.
Note: The proper way of assembling the modules is shown in the photo to the right. Note
that the horn sections of the two ICL-FR modules are joined together as shown in the
photo. Proper orientation of the ICL-LM-FR module in “Triple” arrays is also important.
Make sure the LM module’s input (amplifier) port is at the top of the array. Refer to page
73 for details.
Users Manual
ICL-FR
4