10. Charging the battery
• The camera switches on and the battery charges automatically when the camera is con-
nected to a power supply.
• The status indicator (6) turns red when the battery is charging. A full charge cycle takes ap-
proximately one hour.
• The status indicator (6) will turn off when the battery is fully charged.
• A fully-charged battery will last for approximately 20 minutes of video recording.
In some vehicles, the cigarette lighter is not switched on and off by the ignition. If this is
the case, the vehicle battery may be discharged. Disconnect the charging cable from
the cigarette lighter when you do not need to use the camera.
11. Inserting a memory card
The camera supports memory cards with a capacity of up to 32 GB.
If the device does not recognise your memory card, remove the memory card and
insert it again.
The memory card should be formatted before using the device (refer the menu instruc-
tions in this manual for details).
• Insert the memory card into the card slot (10).
• The memory card contacts must point towards the display (3).
• To remove the memory card, press the memory card inwards and then release it. The mem-
ory card will spring back and protrude out of the card slot (10), allowing you to remove it from
the camera.
9
