This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or the
capture in electronic data processing systems require the prior written approval by the editor. Reprinting, also in
part, is prohibited. This publication represent the technical status at the time of printing.
Copyright 2017 by Conrad Electronic SE.
*1607017_V1_1117_02_mxs_m_en
• USB operation is not possible in DOS or in the safe mode of Windows.
Depending on the computer or the BIOS/Setup, however, operation of a USB keyboard
and a USB mouse is possible. Nevertheless, it is necessary to connect them directly to the
computer’s USB interface and not to the USB hub.
• USB devices can be plugged in and unplugged while the PC is in use. This means that you
do not have to switch off your computer when you want to plug in or unplug devices (with
other interfaces this can cause damage, e.g., if you connect or disconnect a PS/2 mouse
during operation).
If, however, data transfers are in progress on the USB port, e.g. if an external disk is
transferring data to the computer, and you unplug the USB plug, the system might crash or
the data system on the disk may be damaged.
• For some USB devices (e.g. USB hard drives), Windows XP, Windows Vista or Windows 7
displays an icon with an arrow in the menu bar. You can “disconnect” the USB device from
the computer using this function, i.e. instruct the computer to close open files. After this, the
USB device can be removed and no data will be lost.
• Use only suitable USB3.0 cables for connecting USB3.0 devices. Please note that the data
transfer rate may decrease if the USB3.0 cables are very long.
• The switch for each of the 7 USB ports switches off only the operating voltage for the
respective USB port.
The USB port marked with a lightning/battery symbol can be used to charge an iPad.
This particular USB port cannot be used for USB2.0/USB1.1 devices, but only for
USB3.0 devices!
Care and cleaning
• Disconnect the product from the power supply before cleaning.
• Do not use any aggressive cleaning agents, rubbing alcohol or other chemical solutions as
they can cause damage to the housing and malfunctioning.
•
Clean the product with a dry, fiber-free cloth.
• Do not immerse the product in water.
Disposal
Electronic devices are recyclable waste and must not be disposed of in the
household waste. At the end of its service life, dispose of the product according to
the relevant statutory regulations.
You thus fulfill your statutory obligations and contribute to the protection of the
environment.
Technical data
a) USB hub
USB ports ..................................... 7
USB transmission type ................. USB3.0 (backwards compatible with USB2.0/1.1)
Dimensions (W x H x D) ............... 37 x 25x 166 mm
Weight .......................................... 127 g
b) Wall plug transformer
Input voltage ................................. 100 - 240 V/AC, 50/60 Hz
Output voltage/current .................. 5 V/DC, 4 A
