37
Performing a reset
• In the menu, select ADVA and push the ENTER (7) button.
• Select the item System Reset with the UP (5) and DOWN (6) buttons.
• Push the button ENTER (7) and select SURE with the button UP (5), to reset the effect light. Select NO with
the button DOWN (6), in order to not reset the effect light.
• Press the ENTER button (7) to confirm your input.
Resetting to the Factory Settings
• In the menu, select ADVA and push the ENTER (7) button.
• Select the item Factory Setting with the UP (5) and DOWN (6) buttons.
• Push the button ENTER (7) and select SURE with the button UP (5), to reset the effect light to factory set
-
tings. Select NO with the button DOWN (6), in order to not reset the effect light to factory settings.
• Press the ENTER button (7) to confirm your input.
i) Calling Information
• In the menu, select STAT and push the ENTER (7) button.
• This overview shows the operating status of the device:
Work Mode = Operating mode
Address = Selected DMX address
Version = Firmware version
Elapse = Operating duration since the last commissioning
Total = Total operating duration
