5.4 Operation
Consult an expert when in doubt about the operation, safety or connection of the appliance.
Improper use of this product can result in damage to the product or connected devices.
If it is no longer possible to operate the product safely, take it out of operation and protect
it from any accidental use. DO NOT attempt to repair the product yourself. Safe operation
can no longer be guaranteed if the product:
– is visibly damaged,
– is no longer working properly,
–
has been stored for extended periods in poor ambient conditions or
– has been subjected to any serious transport-related stresses.
5.5 USB cable
As power supply, only use the included USB cable with a compatible USB power adapter
(not included).
Only connect the USB power adaptor (if used) to a normal mains socket connected to the
public supply. Before plugging in the power adaptor, check whether the voltage stated on
the power adaptor complies with the voltage of your electricity supplier.
If the USB cable is damaged, it must be replaced with a cable of the same type.
The mains outlet must be located near to the device and be easily accessible.
Make sure that the USB cable is not squeezed, bent, damaged by sharp edges or put under
mechanical stress.
Ensure that cables are not pinched, kinked or damaged by sharp edges.
Always lay cables so that nobody can trip over or become entangled in them. This poses
a risk of injury.
5.6 Connected devices
Also observe the safety and operating instructions of any other devices which are
connected to the product.
6 Product overview
6.1 Product
1
2
3
4
1 HDMI output port
2 USB-C™ port (DC input)
3 Control button
4 LED status indicator light
6.2 LED status indication and Control button
Control button
Function / Product status
LED status
indicator light
—
Connected to power supply.
Solid red
—
Is in standby mode and ready for
connection.
Solid blue
Single press
Start screen mirroring.
Solid blue
Single press
Pause/Stop screen mirroring.
Flashing blue
Long press for 3 seconds
Reset system.
Solid red
7 Plugging the product to the display device and power
To connect the product to the display device (TV, projector or monitor) and power supply:
1. Turn off the TV/display device.
2. Plug one end of the HDMI cable (not included) to the HDMI port on the product, and plug
the other end of the cable to the HDMI input port on the TV/display device.
3. Plug one end of the USB cable (included) to the USB-C™ port (DC input) on the product,
and plug the other end of the cable to a USB-A port (5 V/DC, min. 500 mA) on the TV or a
suitable USB power adapter to power the product.
Æ
The LED indicator light will illuminate solid red to indicate that the product is connected
to the power supply.
4. Turn on the TV/display device and set the input source to HDMI.
Æ
The Home screen of the product will be shown on the TV/display device.
Æ
The LED indicator light will turn solid blue to indicate that the product is in Standby
Mode and ready for connection.
5. Observe the SSID, Password and IP address of the product shown on the Home screen to
connect the product to your mobile device and local Wi-Fi network.
Æ
The icons on the top corner of the Home screen show the current connected/
disconnected status of your devices.
Operating Instructions
Full HD Wireless Presentation Receiver
Item No. 2521196
1 Intended use
This product allows you to screen mirror or cast HD videos, games, music, photos or files from
your smartphone, tablet or laptop wirelessly to TVs, projectors or monitors equipped with an
HDMI input port. The product is suitable for business meetings, education, trainings and home
entertainment.
Plug and play design, no app installation is required. Mirror, start or stop the screen sharing
with the click of a button.
The product supports 1080p Full HD resolution with ultra-low latency. The product supports
multiple platforms including iOS, Android, MacOS, and Windows
®
operating systems for flexible
and productive presentations and collaboration from individual devices.
The product is intended for indoor use only. Do not use it outdoors. Contact with moisture must
be avoided under all circumstances.
If you use the product for purposes other than those described, the product may be damaged.
Improper use can result in short circuits, fires, or other hazards.
The product complies with the statutory national and European requirements. For safety and
approval purposes, you must not rebuild and/or modify the product.
Read the operating instructions carefully and store them in a safe place. Make this product
available to third parties only together with the operating instructions.
All company names and product names are trademarks of their respective owners. All rights
reserved.
HDMI is a registered trademark of HDMI Licensing L.L.C.
Android is a trademark of Google LLC.
2 Delivery content
1 x Full HD Wireless Presentation
Receiver
1 x USB power cable (USB-A to
USB-C™)
1 x Operating instructions
3 Latest product information
Download the latest product information at
www.conrad.com/downloads
or scan the QR code
shown. Follow the instructions on the website.
4 Description of symbols
The following symbols are on the product/appliance or are used in the text:
The symbol warns of hazards that can lead to personal injury.
5 Safety instructions
Read the operating instructions carefully and especially observe the safety
information. If you do not follow the safety instructions and information
on proper handling in this manual, we assume no liability for any resulting
personal injury or damage to property. Such cases will invalidate the warranty/
guarantee.
5.1 General information
The device is not a toy. Keep it out of the reach of children and pets.
Do not leave packaging material lying around carelessly. This may become dangerous
playing material for children.
If you have questions which remain unanswered by these operating instructions, contact
our technical support service or other technical personnel.
Maintenance, modifications and repairs must only be completed by a technician or an
authorised repair centre.
5.2 Handling
Please handle the product carefully. Jolts, impacts, or a fall, even from a low height, can
cause damage to the product.
5.3 Operating environment
Do not place the product under any mechanical stress.
Protect the product from extreme temperatures, strong jolts, flammable gases, steam and
solvents.
Protect the product from high humidity and moisture.
Protect the product from direct sunlight.
