Renkforce 1488542, Руководство по эксплуатации

Страница: 35 / 76

35
The following tables provide information about the effects of the settings on the individual DMX channels.
4-channel DMX-mode
DMX channel Value Function
1 000-255 Brightness red 0 - 100%
2 000-255 Brightness green 0 - 100%
3 000-255 Brightness blue 0 - 100%
4 000-255 Brightness white 0 - 100%
7-channel DMX-mode
DMX channel Value Function
1 000-255 Total brightness 0 - 100% (channel 7 = 000)
2 000-255 Brightness red 0 - 100% (channel 7 = 000)
3 000-255 Brightness green 0 - 100% (channel 7 = 000)
4 000-255 Brightness blue 0 - 100% (channel 7 = 000)
5 000-255 Brightness white 0 - 100% (channel 7 = 000)
6 000-255 Speed of strobe effect slow → fast
7 000-015 No function
016-255 Automatic mode from slow → fast
13. Handling
• Never connect the mains plug to a mains socket immediately after the device has been taken from a cold to a warm
environment. The resulting condensation may destroy the device. Allow the device to reach room temperature
before connecting it. Wait until the condensation has evaporated.
• Never plug in or unplug the mains plug when your hands are wet.
• Never pull the mains plug from the mains socket by the cable. Only pull it from the mains socket by the intended
grip areas.
• Always pull it from the socket using the intended grips.
• Disconnect the mains plug from the mains socket during thunderstorms for reasons of safety.
• Never put any filter foils, masks or other materials over the light exit. This may cause heat damage and danger of
fire.
• The device may heat up during operation. Never touch the casing during operation. Let the effect light cool off after
operation before touching or cleaning the casing.
• Do not cover the device to ensure sufficient ventilation. Air circulation also must not be impaired by any objects
like magazines, tablecloths, curtains, etc. During operation, keep a minimum distance of 0.5 m around the device.