60
o) Function “Power Saving Mode”
Here you can set a time after which the LC display will switch off to save power. Furthermore, whether the
LC display will switch itself on when a movement is recognised in the recording area can be switched on/
off.
Only the LC display is switched off; monitoring or recording are not influenced.
• After calling the function, use the control buttons “
S
” or “
F
” (9) to choose between “Time Interval” or
“Wake-up on Motion”. Then push the button “OK” (8).
• If you have chosen “Time Interval”, the arrows “
S
” or “
F
” (9) can be used to set a time after which the
LC display will switch itself off (30 seconds, 2 minutes, 5 minutes or10 minutes). If you choose “Off”, the
LC display remains activated permanently.
Save the selection with the button “OK” (8); then you will leave setting mode again. Cancel as usual with
the “MENU” (5) button.
• If you have chosen “Wake up on Motion”, the arrows “
S
” or “
F
” (9) can be used to choose between
“Yes” (LC display is automatically activated when a motion is recognised in the recording area) and “No”
(LC display remains off).
Save the selection with the button “OK” (8); then you will leave setting mode again. Cancel as usual with
the “MENU” (5) button.
