Renishaw SLM 250, Инструкция по установке и эксплуатации

Страница: 7 / 50

1-1
General saf
ety
1 General safety
CAUTION:
Before unpacking and installing the SLM 250, read the safety instructions below
carefully and ensure that they are followed at all times by all operators. Failure to do so could
adversely affect the performance of the SLM 250 and/or lead to personal injury. Operators must
be trained in the use and application of the SLM 250 and accompanying accessories before being
allowed to operate the equipment.
1.1 Operation and maintenance
Following the simple maintenance procedures below will prolong the operational life and continued
high performance of the system. The user should determine the frequency of inspection and
maintenance actions according to the conditions of use.
• The product should only be connected to using the approved connector type and wiring as
prescribed in section 4.2, “Cables”.
• Changing the SLM 250 port and IP addresses must be carried out using only the SLM 250
software application by appropriately trained personnel.
• Disconnect power before performing any maintenance operations.
• Maintenance is restricted to procedures described in section 7, “Maintenance and care of the
SLM 250”.
1.2 Warnings
• Beware of unexpected movement. The user(s) must remain outside the full working envelope of
the SLM 250 whilst in operation.
• It is the machine supplier’s responsibility to ensure that the user is made aware of any hazards
involved in operation, including those mentioned in Renishaw product documentation.
• The SLM 250 must be transported in Renishaw supplied packaging.
• This equipment is not suitable for use in a potentially explosive atmosphere.