Renishaw QUANTiC RTLC40-S, Руководство по установке, Страница: 22 / 24

20 QUANTiC RTLC40-S installation guide
Power supply 5V −5%/+10% Typically 150 mA fully terminated (analogue output)
Typically 200 mA fully terminated (digital output)
Power from a 5 Vdc supply complying with the requirements for SELV of standard IEC 60950-1
Ripple 200 mVpp maximum @ frequency up to 500 kHz
Temperature
(system)
Storage − 20 °C to +70 °C
Operating 0 °C to +70 °C
Humidity
(system)
95% relative humidity (non-condensing) to IEC 60068-2-78
Sealing IP40
Acceleration
(system)
Operating 400 m/s², 3 axes
Shock
(system)
Operating 500 m/s², 11 ms, ½ sine, 3 axes
Vibration
(readhead)
Operating 100 m/s² max @ 55 Hz to 2000 Hz, 3 axes
(scale) Operating 300 m/s² max @ 55 Hz to 2000 Hz, 3 axes
Mass Readhead 9 g
Cable 26 g/m
EMC compliance IEC 61326-1
Readhead cable
Single-shielded, outside diameter 4.25 ±0.25 mm
Flex life > 20 × 10
6
cycles at 30 mm bend radius
UL recognised component
Maximum length 5 m (analogue)
3 m (digital)
Connector options Code - connector type
A - 9-way D-type - Digital output only
L - 15-way D-type (standard pin-out) - Analogue output only
D - 15-way D-type (standard pin-out) - Digital output only
H - 15-way D-type (alternative pin-out)
X - 12-way circular connector - Digital output only
J - 14-way JST connector
Typical sub-divisional error (SDE) Analogue output Digital output
< ±120 nm < ±80 nm
CAUTION: Renishaw encoder systems have been designed to the relevant EMC standards, but must be correctly integrated to achieve EMC compliance.
In particular, attention to shielding arrangements is essential.
General specifications