Renishaw APCA-45, Инструкция по установке и эксплуатации

Страница: 29 / 48

11
Connecting the APCA-45 to an HSI-C interface and the CNC
Standard probe connector (3-way)
17 Screen
16 Probe Input +
15 Probe Input –
CNC
Retract confirm input
Supply 12 V – 30 V
Supply 0 V
Screen
Controller
protective earth
Controller reference ground
HSI-C interface
Machine tool
Block 1
2
4
1
5
3
1 Supply 12 V – 30 V
2 Supply 0 V
3 Supply 0 V
4 Screen
22 Probe status NC
23 Probe status common
24 Probe status NO
26 External LED 0 V
25 External LED 10 V
Block 4
Block 5
Block 6
APCA-45
Block 3
9 12 V – 30 V out
(fused 100 mA)
10 Inhibit input
11 Inhibit return
12 0 V
NOTES:
When the APCA-45 is not being
used, it is recommended that
the inhibit function is used.
The retract confirm output
could be used to set the inhibit
function (for more information
see “Probe inhibit function” on
page 12).
When connecting the APCA-45
to the HSI-C interface, please
use the connection labelled
STANDARD PROBE.
Connect either pin 22 or pin 24,
but do not connect both wires.
Pin APCA-45 connections
2 Retract confirm sensor
4 Probe input +
1 Probe input –
5 Supply 0 V
3 Supply 12 V – 30 V
Probe
input
Status Normally
open
(NO)
Normally
closed
(NC)
Probe
triggered
Closed Open
Probe
seated
Open Closed