Applications Engineering
SKP16C62P User’s Manual Rev. 1.0
13 / 22
December 2003
6.9 Performing Debug Using Symbols
Normally when a new project is started using HEW, debugging symbols are enabled. If you are
unable to debug your program using symbols in KD30, add the debug option [
-g
] in HEW before
compiling the programs. To enable the [
-g
] option, perform the following:
•
Open the workspace and project in HEW.
•
Select [Renesas M16C Standard Toolchain] from Options pull-down menu.
•
Click on Link tab.
•
Select [Output] under the [Category] list box.
•
Click on checkbox for [
-g
] ‘Outputs source debug information….’
•
Click on [OK] button
For more information, see the HEW user’s manual.
electronic components distributor
