background image

 

 

First use of the E10A module 

31.

 

The ‘Please choose driver’ dialog will be shown. Click <OK> 

32.

 

The ‘Driver Details’ dialog will be shown, please select “Renesas E-Series USB Driver” as illustrated. The 
‘Interface’ and ‘Channel’ items will be automatically populated. Click <Close>. 

33.

 

The Firmware setup dialog will be shown warning you not to disconnect the USB cable until the firmware 
download is complete. Click <OK>.   

D007124_11_S01_V03 

34.

 

The firmware will be downloaded to the E10A module; this will take a few moments. 

Please do not disconnect the E10A from the host during download, doing so is likely to damage 
the E10A module. 

 

 

35.

 

A box will appear; “Please reset the user system and press <Enter> key.” 

36.

 

Press the “Reset” button on the RSK and press <Enter> (or click <OK>). 

37.

 

HEW will connect to the target system. 

38.

 

Click on the ‘Emulator System’ button in HEW. 

 

 

39.

 

The “Configuration” dialog will appear, select the “Loading Flash memory” tab. 

40.

 

Select the “Enable” radio on both loading and erasing flash memory. 

41.

 

Click the <Browse> button and navigate to the project folder (Usually located in 
c:\WorkSpace\<project_name>) and select the “fmtool_e10a.mot” file, click <Open>. 

42.

 

Check the settings against the picture to the right. 

43.

 

Click <OK> on the “Configuration” dialog. 

44.

 

Right click on the <project_name>.abs file listed in the download modules area of the 
Workspace view and select “Download”. 

45.

 

The “Downloading program” window will show the progress of the download, once 
completed it will disappear. 

46.

 

Next, the “Disassembly” view will show. 

47.

 

Click the ‘Go’ button.   

 

48.

 

The code will run. You will see the LEDs flashing on the board. After pressing any of the user switch, the rate of flashing can be adjusted using the Analog 
Adjust control. 

 

49.

 

Click the ‘Stop’ button. 

 

The code will stop and the source code opened at the current program counter. 

 

5. Next 

Step 

After you have completed this quick start procedure, please review the tutorial code and sample code that came with the kit. You can add projects to the 
current workspace by selecting (Project > Insert Project) from the main menu. The tutorials will help you understand the device and development process 
using Renesas Development Tools. 
The Hardware manual supplied with this RSK is current at the time of publication. Please check for any updates to the device manual from the Renesas 
website at: 

www.renesas.com/renesas_starter_kits

 
 
 
 

Содержание SH7201







Отзывы: