Quick Start
Renesas Starter Kit for SH7201
User switches
E10A connector
Power jack
User LEDs
Analog adjust
LCD connector and module
Application headers
Reset switch
E10A for Starter Kits Debug Module
1. Installation
Do not connect the E10A module until the software support has been installed.
1.
Insert the CD into your computer’s CD-ROM drive. The CD should automatically run the installation program. If the installer does not start, browse to
the CD root folder and double click on ‘setup.exe’.
2.
The installer will ask you which language is to be used, please choose the appropriate one and click <OK>.
3.
On the first screen of the installer proper, click <Next>.
4.
The License Agreement will be shown, read and click <Yes>.
5.
The next screen asks you to pick the world region – please select and click <Next>.
6.
Select the RSK you wish to install and click <Next> to continue.
7.
The destination folders are specified on the next screens. It is recommended to accept the default settings. Click <Next> to continue.
8.
Click <Next> on all screens until the Installation process commences.
9.
After the installation the machine’s site code will be shown, this is not important at this stage, click <Next> then <Finish>.
10.
The Auto-update dialog box will be launched. Configure the Auto-update settings dialog to allow your installation to be checked for updates.
D007124_11_S01_V03
