background image

 

Disclaimer 

 

By using this Renesas Starter Kit (RSK), the user accepts the following terms: 

 

The RSK is not guaranteed to be error free, and the entire risk as to the results and performance of the RSK is 
assumed by the User. The RSK is provided by Renesas on an “as is” basis without warranty of any kind whether 
express or implied, including but not limited to the implied warranties of satisfactory quality, fitness for a particular 
purpose, title and non-infringement of intellectual property rights with regard to the RSK. Renesas expressly 
disclaims all such warranties. Renesas or its affiliates shall in no event be liable for any loss of profit, loss of data, 
loss of contract, loss of business, damage to reputation or goodwill, any economic loss, any reprogramming or recall 
costs (whether the foregoing losses are direct or indirect) nor shall Renesas or its affiliates be liable for any other 
direct or indirect special, incidental or consequential damages arising out of or in relation to the use of this RSK, even 
if Renesas or its affiliates have been advised of the possibility of such damages.  

 
 
 

Precautions 
 

The following precautions should be observed when operating any RSK product: 
 

 

This Renesas Starter Kit is only intended for use in a laboratory environment under ambient temperature and humidity 
conditions. A safe separation distance should be used between this and any sensitive equipment. Its use outside the 
laboratory, classroom, study area or similar such area invalidates conformity with the protection requirements of the 
Electromagnetic Compatibility Directive and could lead to prosecution.  

 

The product generates, uses, and can radiate radio frequency energy and may cause harmful interference to radio 
communications. However, there is no guarantee that interference will not occur in a particular installation. If this 
equipment causes harmful interference to radio or television reception, which can be determined by turning the 
equipment off or on, you are encouraged to try to correct the interference by one or more of the following measures;  

 

  ensure attached cables do not lie across the equipment  

  reorient the receiving antenna  

  increase the distance between the equipment and the receiver  

  connect the equipment into an outlet on a circuit different from that which the receiver is connected  

  power down the equipment when not in use  

  consult the dealer or an experienced radio/TV technician for help NOTE: It is recommended that wherever 

possible shielded interface cables are used.  

 

The product is potentially susceptible to certain EMC phenomena. To mitigate against them it is recommended that the 
following measures be undertaken;  

 

  The user is advised that mobile phones should not be used within 10m of the product when in use.  

  The user is advised to take ESD precautions when handling the equipment.  

 

The Renesas Starter Kit does not represent an ideal reference design for an end product and does not fulfil the 
regulatory standards for an end product. 

 
 

Содержание RZ/A1H Series



































Отзывы: