Renesas RZ/A1H Series, Руководство пользователя

Страница: 21 / 34

RSK+RZA1H 3. Tutorial Project Workspace
R20UT2845EG0200
Rev.
2.00
Page 21 of 34
3.7 Running the code from the QSPI Flash ROM
3.7.1 Debug Build – executing in RAM.
It is possible to run the above code from QSPI on start-up. For this to function, the boot loader should be
present in the QSPI. The board is shipped with pre-installed boot loader, but if this is changed in anyway, then
please re-install it using QSPI_LOADER sample.
On start-up, the boot loader will check the presence of the Tutorial code and then execute it. If the code is not
present, it will flash the LED1 continuously. The code can be loaded as follows:

Disconnect the debug session using the
disconnect icon.

Open the Windows Explorer and select
the Tutorial project directory.

Execute the file LoadTutorialToQSPI.bat.

Select Option 1 – Debug. This will now
load the Tutorial code into QSPI.

Restart the board by disconnecting and
reconnecting the power supply and the
Tutorial code will run by iteself.
Note:
Please refer to section 5.3 for information
on generating binary files.
Mar 21, 2014